609-231-3743
Pro FM Transmitters /Pro TV Transmitters / LPFM
FM Transmitters
PCS 1KW DSP Stereo FM Transmitter $4,195 ON SALE !!!
OUR NEW 1000W FM TRANSMITTERS WITH DSP AND RDS
New enhanced version is out! CYBER MAX FM+ is the first from a line of rack mounted FM transmitter series for demanding broadcasters, operating in the whole band II, from 87.5 to 108 MHz (extended Japanese band can be ordered as well). This unit in large 2H 19" rack enclosure contains mains power supply and offers plenty of power (950-1100W). Six strong 80x80mm cooling fans with protection mesh will take care of any excessive heat easily. Transmitter consists of a stereo encoder with pre-emphasis circuit, active low-pass filter, our professional series PLL synthesizer, wideband no-tune RF stage with temp protection, good output RF filter and optional RDS and/or DSP processor. You can select the performance range (model A/B/C/D/E) that is most suitable for your budget. Unit is rugged and made for 24/7/365 operation, each comes with a wide-angle high contrast backlit LCD display. In our opinion the best quality/price ratio possible.
RDS parameters can be programmed with the help of a PC via serial RS232 connection (cable and software included).
This unit can give up to 1100W of clean RF power, but this is not recommended for long term operation.
General features:
- Great stereo sound with excellent separation
- USB or RS232 remote control via PC
- Standard 19" 2H rack, clean design and high quality manufacturing
- Low distortion and good Signal/Noise ratio
- Modular construction, internal boards can be replaced one by one
- Built-in CPU system for controlling and monitoring
- Easy change of frequency and other parameters (UP/DOWN keys, no tuning required) - TEMP protection - SWR protection
- Professional grade RDS encoder!
- Friendly user interface, keys can be locked with an internal jumper
- In our opinion the best quality/price ratio possible.
- Industrial quality and rugged switching-mode power supply
What parameters can I change via PC remote control?
You can change virtually any parameter available. The program may change slightly over time as we make enhancements, but the main features will remain as you can see below:
Technical specifications:
RF SECTION
- Output power: 1000W (900-1100W typ), power is adjustable via LCD
- Output impedance 50 unbalanced, VSWR less than 2:1 for full output
- Output connector 7/16 female (rear panel )
- Frequency range 87.5 to 108MHz
- Smallest PLL step 6.25KHz (12.5/25/50/100 can be selected as well)
- RF Spurious > -80 dBc @ +- 1MHz min. out of carrier
- RF Harmonics > -60 dBc Standard
- Monitoring Led: Power on, SWR/TEMP/PLL warning
- Modulation capability: FM
AUDIO SECTION
- Audio connectors: RCA (cinch) or XLR (DSP version)
- Audio level required: 1Vpp
- Audio input impedance: 10Kohms resistive, balanced
- Pre-emphasis Flat, 50 or 75usec
- Harmonic distortion ( THD ) <0.1% ( 0.05% typ. )
- Channel separation 50 dB min., ( 65 dB typ. ), 20Hz to 15kHz, DSP model
- S/N Ratio with CCIR unweighted: 80dB
- S/N Ratio with CCIR weighted: 78dB
- Frequency amplitude: 0.5dB, 30Hz - 15kHz
GENERAL
- AC mains power: 110-240V 50/60Hz universal, works everywhere on this planet
- Ambient temperature: -5° to +45°C
- External dimensions ( W x D x H ) 19" x depth (170mm) x height 2HE (88mm)
- Weight 13kg
D&M TX2KW 2000 Watt FM Stereo Transmitter $7,695
PCS D&MTX2KW is a professional FM Stereo transmitter with an on-board stereo generator, advanced audio processing/limiter which covers the entire 87.5-108 MHz Broadcast Band.
This transmitter features a highly efficient, fully solid state FM-modulated transmitter with up to 2200W output. Advanced digital circuitry protects the system against high reflections, voltage overload, high SWR, high temperature, over current, short circuit and over-modulation. All of the transmitters parameters are displayed on our large digital front panel control.
The units amplifier (4 x BLF574's) is mounted to a massive 14"x10"x2" heat sink and force cooled by a UF6030 industrial fan system delivering 177cfm with a low 50dB noise level and filtered through our 2kW silver coiled Low Pass Filter.
Advanced FM Technology places this 2K in the range of Crown Broadcast/OMB/BW but at a fraction of the price, we believe our complete new range of transmitters/amplifiers regardless of band FM/UHF/VHF exceed the quality and specification of the top manufacturers, we back this with a full 3 years warranty against manufacturer defect, for a small investment we can extend the warranty up to 10 years.
Technical specifications:
-Frequency range: 87.5-108 MHz, 10 KHz/Step
-Modulation: FM, ±75 KHz peak deviation
-Frequency stability: <±100 Hz
-RF output power: 0 to 2200W ±0.5 dB (max)
-Max reflected power: 150 W
-Harmonic suppression: <-65 dBC
-RF output impedance: 50ohm;
-RF output connector: 7/16 DIN type -female
-Audio/MPX input level: -10 to +13 dBm @±75 KHz deviation
-Audio/MPX input impedance: 10K/600ohm, Balanced / unbalanced
-Audio input connector: XLR-female
-AUX / MPX input level: -10 to +13 dBm @±75 KHz deviation
-AUX channel input impedance: 10K
-MPX and AUX input connector: BNC-female
-Pre-emphasis: 0 / 50 / 75 us
-S/N ratio Mono: >73 dB (20 to 20 KHz)
-S/N ratio Stereo: >68 dB (20 to 15 KHz)
-Distortion: <0.05% THD @± 75 KHz dev.
<0.2% THD @± 150 KHz dev. (limiter threshold > 150 KHz)
-Stereo crosstalk: >60 dB (100 to 5 KHz)
>50 dB (20 to 15 KHz) int. MPX encoder
>60 dB with ext. MPX encoder
-Audio channel frequency response: 20 to 15 KHz ± 0.15 dB
-MPX input frequency response: 10 to 100 KHz ± 0.15 dB
-AUX input frequency response: 10 to 100 KHz ± 0.15 dB
- I/O liner: Disable RF, Forward power
- Mains supply requirements: 230 Vca ±15% 50/60 Hz 4800 VA/3600W @ 2000 W output
- Operating temperature range: 0÷35° C recomm. -10÷45 °C max.
- Dimensions without handless: 266 x 445 x 600 mm (H x W x L) rack std. 19” 6H
- Weight: ca. 54 Kg
IMPORTANT NOTE:
Units ship directly from our facility in Asia. We will not charge you VAT, but you may have to pay VAT or import tax as the unit enters your country.
D&M TX3KW 3000 Watt FM Stereo Transmitter $11,795
D&M TX5KW 5000 Watt FM Stereo Transmitter
$18,995
D&M TX10KW 10,000 Watt FM Stereo Transmitter
$36,695
D&M TX20KW 20,000 Watt FM Stereo Transmitter
$68,795
Professional 3KW to 20KW Stereo FM Transmitters with on-board limiting.
Units have 3 years warranty and we do not charge VAT for these, email for details!
PCS D&MTX3KW-20KW are professional FM Stereo transmitters with an on-board stereo generator, advanced audio processing/limiter which covers the entire 87.5-108 MHz Broadcast Band.
This transmitters features a highly efficient, fully solid state FM-modulated transmitter with up to 20000W output. Advanced digital circuitry protects the system against high reflections, voltage overload, high SWR, high temperature, over current, short circuit and over-modulation. All of the transmitters parameters are displayed on our large digital front panel control.
The units amplifiers (based on BLF578's) are mounted to a massive 14"x10"x2" heat sink and force cooled by UF6030 industrial fan systems delivering 177cfm with a low 50dB noise level and filtered through our silver coiled Low Pass Filter.
Advanced FM Technology places these units in the range of Crown Broadcast/OMB/BW but at a fraction of the price, we believe our complete new range of transmitters/amplifiers regardless of band FM/UHF/VHF exceed the quality and specification of the top manufacturers, we back this with a full 3 years warranty against manufacturer defect, for a small investment we can extend the warranty up to 10 years.
Technical specifications:
-Frequency range: 87.5-108 MHz, 10 KHz/Step
-Modulation: FM, ±75 KHz peak deviation
-Frequency stability: <±100 Hz
-RF output power: 0 to 3100W ±0.5 dB (max)
-RF output power: 0 to 5400W ±0.5 dB (max)
-RF output power: 0 to 10400W ±0.5 dB (max)
-RF output power: 0 to 20500W ±0.5 dB (max)
Specs below are for 5KW model, for others please ask
-Max reflected power: 500 W
-Harmonic suppression: <-65 dBC
-RF output impedance: 50ohm;
-RF output connector: 7/16 DIN type -female
-Audio/MPX input level: -10 to +13 dBm @±75 KHz deviation
-Audio/MPX input impedance: 10K/600ohm, Balanced / unbalanced
-Audio input connector: XLR-female
-AUX / MPX input level: -10 to +13 dBm @±75 KHz deviation
-AUX channel input impedance: 10K
-MPX and AUX input connector: BNC-female
-Pre-emphasis: 0 / 50 / 75 us
-S/N ratio Mono: >73 dB (20 to 20 KHz)
-S/N ratio Stereo: >68 dB (20 to 15 KHz)
-Distortion: <0.05% THD @± 75 KHz dev.
<0.2% THD @± 150 KHz dev. (limiter threshold > 150 KHz)
-Stereo crosstalk: >60 dB (100 to 5 KHz)
>50 dB (20 to 15 KHz) int. MPX encoder
>60 dB with ext. MPX encoder
-Audio channel frequency response: 20 to 15 KHz ± 0.15 dB
-MPX input frequency response: 10 to 100 KHz ± 0.15 dB
-AUX input frequency response: 10 to 100 KHz ± 0.15 dB
- I/O liner: Disable RF, Forward power
- Mains supply requirements: 230 Vca ±15% 50/60 Hz 4800 VA/3600W @ 2000 W output
- Power consumption: 6850W typical at 5000W
- Operating temperature range: 0÷35° C recomm. -10÷45 °C max.
- Dimensions without handless: 266 x 445 x 600 mm (H x W x L) rack std. 19” 6H
- Weight: ca. 54 Kg
IMPORTANT NOTE:
Units ship directly from our facility in Asia. We will not charge you VAT, but you may have to pay VAT or import tax as the unit enters your country.
Elenos 2KW DSP Stereo FM Transmitter $19,795
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Elenos 5 KW DSP Stereo FM Transmitter $37,995
All models are W.B. 87,5MHz - 108MHz and their frequency is changeable without adjustment. The amplifiers are accessible from the front panel, the RF, control and power supply connections have been designed to ease the replacement of a module with no service interruption.
Features
- ICEFET® This innovative Elenos application combines the very high yield of Mosfet with a maximum efficiency dissipator. The result is a drastic reduction of temperature and a consequent increase in MTBF, thereby allowing us to develop the smallest and lightest transmitters available on the market.
- ALWAYS FUNCTIONAL Thanks to “SOFT FAILURE DESIGN”, efficient protection systems and redundancy of apparatus otherwise needed to eliminate "SINGLE-POINT-FAILURES”, Elenos transmitters are always «ON AIR» even under extreme work conditions.
- IPC (Intelligent Power Control) Another exclusive Elenos application. IPC maintains constant output power within 2% of the defined value, regardless of fluctuations in supply voltage, RF piloting or charge conditions.
- IPF (Intelligent Proportional Foldback) IPF is an intelligent system that varies the apparatus output power in relation to changes in charge conditions so that the transmitter can always function even under significantly variable charges.
- BROAD BAND The declared technical performances of the transmitter are maintained across the entire 88-108 MHz band without the need for any kind of calibration. This means it is ideal for n+1 applications.
- CONSTANT YIELD The supply voltage to Mosfet and Bias systems are both controlled to optimise yield at any frequency and output power level. This means low heating, high yield and consequent low operating costs.
- NO IPA Elenos avoids using intermediate charge amplifiers to eliminate one of the redundancy bottlenecks frequently present in medium-high power transmitters.
- EASY MAINTENANCE All components (RF modules, electronic control cards, fans, power supply units) are easily accessed from top and bottom sections and from front and rear panels.
- SMS ALARMS/TELEMETRY Connection to a GSM modem ensures SMS notification of eventual alarms, faults and machine status. SMS also ensures inter-action with the transmitter. A remote PC can be used to maintain control and interaction of all transmitter operating parameters. The industrial standard Hostlink protocol ensures safe control of an enormous quantity of information for remote diagnostics.
- WORLD-WIDE TECHNICAL SERVICE ELENOS is a producer of FM apparatus with one of largest distribution channels in the world. Every distributor is essentially chosen for the technical support it can offer to clients.
PCS TX-100 Stereo FM Transmitter
$2,795
ON SALE $2,195
Solid State TX 100 Watt Stereo FM Transmitter
- 100 Watts of Frequency Agile FM Power in a one rack space.
- Built-in, selectable high separation internal Stereo Generator.
- Fast access to all functions & parameters from front panel via user-friendly menu display
- Instant frequency programmability directly from software
- Proportional Auto-Foldback of output power in the event of excessive VSWR
- Adjustable power output from 0 to full power. with soft-start control
- Automatic power control maintaining the output at any pre-set level
- Modular layout with plug-in, easily replaceable circuits and parts
- Voltage selector for 120 or 230 V operation
- Built in programmable FSK ID Keyer
- Meets or exceeds all FCC and CCIR requirements
- Includes low pass/harmonic filter and can be used as a stand-alone transmitter
GENERAL
Power Output: 30-50-100-150 W adjustable from front panel.
RF Output Impedance: 50 ohm.
RF Output Connector: “N” type.
Monitor RF: -54 dBc, BNC connector
VSWR: 1.5:1 Maximum with automatic fold-back at higher VSWR
Frequency Range: 87.5 ÷ 108.00 MHz, on request 66 ÷ 74 MHz ( OIRT), 76 ÷ 90 MHz (JPN) Programmable in 10 KHz steps.
Frequency Stability: ±1 ppm from -5 to 45°C.
Reference: TCXO 12.8 MHz. Can be syncronized by 1-2-2.5-5-10 MHz self select external clock (option).
Frequency Control: Synthesizer µprocessor control.
Type of Modulation: Direct frequency modulation of carrier frequency.
Lock in Time: Typ. 4 second.
Off Lock Attenuation: = -80 dBc.
Modulation Capability: ±150 KHz.
Modulation Mode: Mono, Stereo, Multiplex, SCA, RDS, Aux.
Preemphasis: Flat/50/75µs selectable from front panel.
Asynchronous AM S/N Ratio: -70 dB below reference carrier with 100% AM modulation @ 400 Hz, without FM modulation.
Synchronous AM S/N Ratio: -65 dB below reference carrier with 100% AM modulation @ 400 Hz with FM modulation ±75 KHz @ 400 Hz.
RF Harmonics: Exceeds EBU/CCIR/FCC requirements.
RF Spurious: Exceeds EBU/CCIR/FCC requirements.
MONAURAL OPERATION
Audio Input Impedance: 600 ohm balanced, 10 Kohms unbalanced.
Audio Input Level: -3 to +9 dBm.
Input Connector: XLR female.
Audio Frequency Response: ±0.15 dB, 30 Hz to 15 KHz.
Total Harmonic Distortion + Noise: 0.03% @ 400 Hz
Intermodulation Distortion: 0.03%, 1 KHz/1.3 KHz, 1:1 ratio
Transient Intermodulation Distortion: 0.03%, 2.96KHz square wave and 14 KHz sine wave.
Distortion: 0.03%, 2.96KHz square wave and 14 KHz sine wave.
FM S/N Ratio: -89 dB RMS detector,-85 dB below ±75 KHz deviation, 50 µs deephasis, weighted.
MULTIPLEX OPERATION
Composite Input Impedance: 1.2 Kohm unbalanced.
Composite Input Level: -3 to +6 dBm
Input Connector: BNC female.
Composite Amplitude Response: ±0.2 dB, 30 Hz to 100 KHz.
Total Harmonic Distortion + Noise: 0.03% @ 400 Hz
Intermodulation Distortion: 0.03%, 1 KHz/1.3 KHz, 1:1 ratio
Transient Intermodulation Distortion: 0.03%, 2.96 KHz square wave and 14 KHz sine wave.
FM S/N Ratio: -89 dB RMS detector, -85 dB below ±75 KHz deviation, 50 µs deephasis, weighted.
STEREO OPERATION
Audio Input Impedance: 600 ohm balanced, 10 Kohm unbalanced.
Audio Input Level: -3 to +9 dBm.
Input Connector: XLR female.
Audio Frequency Response: ±0.15 dB, 30 Hz to 15 KHz.
Total Harmonic Distortion + Noise: 0.03% @ 400 Hz
Intermodulation Distortion: 0.03%, 1 KHz/1.3 KHz, 1:1 ratio
Transient Intermodulation Distortion: 0,03%, 2.96 KHz square wave and 14 KHz sine wave.
FM S/N Ratio: -79 dB RMS detector, -75 dB below ±75 KHz deviation, 50 µs deephasis, weighted.
Stereo Separation: 30÷80 Hz = -53 dB, 80Hz÷15 KHz = -65 dB (Typ. 70 dB).
Crosstalk attenuation: Main to Sub -40 dB 30 Hz to 15 KHz (typ. -55 dB 100 Hz to 8 KHz).
38 KHz Suppression: = -70 dB (typ. -85 dB).
Pilot Frequency: 19 KHz ± 1 Hz
Output Pilot: 1 Vpp., BNC female
Audio Filter Attenuation: = -55 dB @ 19 KHz, > -45 dB 20 KHz to 100 KHz.
Modes: Stereo, Mono L+R,mono L, mono R.
AES/EBU OPERATION
Input Connector: XLR female, optical TOS-LINK.
Data Format: S/PDF,AES/EBU, IEC958, EIAJCP340/1201.
D/A Converter: 24 bit.
Sampling Frequency: from 32 to 96 KHz.
SCA, RDS, AUX OPERATION
Input Impedance: 3 Kohm.
Input Level: -3 to +6 dBm.
Frequency Response: ±0.2 dB, 40 KHz to100 KHz.
Input Connector: BNC female. Most SCA, RDS, AUX, performance parameters are determined primarily by the generator used.
AUXILIARY CONNECTIONS
USB: connector Type B female front panel.
N°2 RS485: Serial Interface connector RJ45 back panel.
Telemetry Interface: connector DB25F back panel.
External Clock: connector SMA female (option).
OPTIONS
External clock: for PLL synchronizing purpose 1-2-2.5-5-10 MHz external reference oscillator with self selection of the incoming frequency.
AES/EBU Digital Audio Input.
RDS/RBDS Coder programmable via PC.
OIRT or JPN version.
FCC LPFM code station.
ELECTRICAL
AC Input Power: 90÷260 VAC 50/60 HZ single phase.
AC Apparent Power Consumption: 70VA @ 30W, 90VA @ 50W, 220VA @ 100W, 300VA@ 150W.
Cos ? > 0.98
Cooling: Forced air with internal long life brushless ball bearing fan.
Acoustic noise:< -56 dBa @ 1 meter.
ENVIRONMENTAL
Operating temperature: -5°C to +45°C.
Guaranteed performance temperature: 0°C to +40°C.
Max Operating Altitude: 2000 mt.
Relative Humidity Range: 0 to 90%.
PHYSICAL DIMENSION
Mounting: Standard 19” chassis 1 U rack.
Size: 485 mm. W x 385 mm. D x 44 mm. H.
Weight: ~ 4,0 Kg.
Features and specifications subject to change without notice
FMT-1KB 1000 Watt Digital FM Broadcast Transmitter ON SALE !! $4,595.00
D&M FMT11-1KA - Professional 1000 Watt Stereo FM Transmitter with on-board limiting.
The FMT11-1KA system is a professional FM Stereo transmitter with on-board stereo generator, advanced audio limiter, and covers the entire 87.5-108 MHz Broadcast Band.
The FMT11-1KA Transmitter, features a highly efficient, solid state FM-modulated transmitter with 1000W output. Advanced digital circuitry protects the system against high reflection, voltage overload, high SWR, high temperature, over current, short circuit, over modulation. All of the transmitters parameters are displayed on our large digital front panel control.
The units amplifier is mounted to a massive heat sink and force cooled by dual 120cfm industrial fans, final RF is filtered through our 2kW silver coiled Low Pass Filter.
Advanced FM Technology places the FMT11-1KA in the range of Crown Broadcast but at a fraction of the price, we believe our complete range of D&M transmitters/amplifiers regardless of band FM/UHF/VHF exceed the quality and specification of the top manufacturers, we back this with a full 2 years warranty against manufacturer defect, for a small investment we can extend the warranty up to 10 years.
Frequency range: 87.5-108 MHz, 10 KHz/Step
-Modulation: FM, ±75 KHz peak deviation
-Frequency stability: <±100 Hz
-RF output power: 0 to 1050W ±0.5 dB (max)
-Max reflected power: 150 W
-Harmonic suppression: <-65 dBC
-RF output impedance: 50 Ω
-RF output connector: 7/16 DIN type -female
-Audio/MPX input level: -10 to +13 dBm @±75 KHz deviation
-Audio/MPX input impedance: 10 KΩ / 600 Ω, Balanced / unbalanced
-Audio input connector: XLR-female
-AUX / MPX input level: -10 to +13 dBm @±75 KHz deviation
-AUX channel input impedance: 10 KΩ
-MPX and AUX input connector: BNC-female
-Pre-emphasis: 0 / 50 / 75 us
-S/N ratio Mono: >73 dB (20 to 20 KHz)
-S/N ratio Stereo: >68 dB (20 to 15 KHz)
-Distortion: <0.05% THD @± 75 KHz dev.
<0.2% THD @± 150 KHz dev. (limiter threshold > 150 KHz)
-Stereo crosstalk: >60 dB (100 to 5 KHz)
>50 dB (20 to 15 KHz) int. MPX encoder
>60 dB with ext. MPX encoder
-Audio channel frequency response: 20 to 15 KHz ± 0.15 dB
-MPX input frequency response: 10 to 100 KHz ± 0.15 dB
-AUX input frequency response: 10 to 100 KHz ± 0.15 dB
-Mains power supply requirements: 90~264VAC; 127~370VDC, Full range universal input
-Operating temperature range: -10 to 45 ℃
-Dimensions: 483 x 132.5 x 400 mm, rack std. 19” 3U (19"x20"x6")
-Weight: 20Kg
FMT-500A 500 Watt Digital FM Broadcast Transmitter $3,595
NEW MODEL FOR 2011
D&M FMT11-500A - Professional 600 Watt Stereo FM Transmitter with on-board limiting.
The FMT11-500A system is a professional FM Stereo transmitter with on-board stereo generator, advanced audio limiter, and covers the entire 87.5-108 MHz Broadcast Band.
The FMT11-500 Transmitter, features a highly efficient, fully solid state FM-modulated transmitter with up to 600W output. Advanced digital circuitry protects the system against high reflection, voltage overload, high SWR, high temperature, over current, short circuit, over modulation. All of the transmitters parameters are displayed on our large digital front panel control.
The units amplifier (BLF574) is mounted to a massive heat sink and force cooled by dual 120cfm industrial fans, final RF is filtered through our 2kW silver coiled Low Pass Filter.
Advanced FM Technology places the FMT11-500A in the range of Crown Broadcast but at a fraction of the price, we believe our complete range of D&M transmitters/amplifiers regardless of band FM/UHF/VHF exceed the quality and specification of the top manufacturers, we back this with a full 2 years warranty against manufacturer defect, for a small investment we can extend the warranty up to 10 years.
Frequency range: 87.5-108 MHz, 10 KHz/Step
-Modulation: FM, ±75 KHz peak deviation
-Frequency stability: <±100 Hz
-RF output power: 0 to 550W ±0.5 dB
-Max reflected power: 75 W
-Harmonic suppression: <-65 dBC
-RF output impedance: 50 Ω
-RF output connector: N type -female
-Audio/MPX input level: -10 to +13 dBm @±75 KHz deviation
-Audio/MPX input impedance: 10 KΩ / 600 Ω, Balanced / unbalanced
-Audio input connector: XLR-female
-AUX / MPX input level: -10 to +13 dBm @±75 KHz deviation
-AUX channel input impedance: 10 KΩ
-MPX and AUX input connector: BNC-female
-Pre-emphasis: 0 / 50 / 75 us
-S/N ratio Mono: >73 dB (20 to 20 KHz)
-S/N ratio Stereo: >68 dB (20 to 15 KHz)
-Distortion: <0.05% THD @± 75 KHz dev.
<0.2% THD @± 150 KHz dev. (limiter threshold > 150 KHz)
-Stereo crosstalk: >60 dB (100 to 5 KHz)
>50 dB (20 to 15 KHz) int. MPX encoder
>60 dB with ext. MPX encoder
-Audio channel frequency response: 20 to 15 KHz ± 0.15 dB
-MPX input frequency response: 10 to 100 KHz ± 0.15 dB
-AUX input frequency response: 10 to 100 KHz ± 0.15 dB
-Mains power supply requirements: 90~264VAC; 127~370VDC, Full range universal input
-Operating temperature range: -10 to 45 ℃
-Dimensions: 19"x20"x6"
-Weight: 15 Kg
FMT -250A 250 Watt Digital FM Broadcast Transmitter ON SALE !! $2,595.00
Frequency range: 87.5-108 MHz, 10 KHz/Step
-Modulation: FM, ±75 KHz peak deviation
-Frequency stability: <±100 Hz
-RF output power: 0 to 300W ±0.5 dB (maximum on certain frequency's)
-Max reflected power: 25 W
-Harmonic suppression: <-65 dBC
-RF output impedance: 50 Ω
-RF output connector: N type -female
-Audio/MPX input level: -10 to +13 dBm @±75 KHz deviation
-Audio/MPX input impedance: 10 KΩ / 600 Ω, Balanced / unbalanced
-Audio input connector: XLR-female
-AUX / MPX input level: -10 to +13 dBm @±75 KHz deviation
-AUX channel input impedance: 10 KΩ
-MPX and AUX input connector: BNC-female
-Pre-emphasis: 0 / 50 / 75 us
-S/N ratio Mono: >73 dB (20 to 20 KHz)
-S/N ratio Stereo: >68 dB (20 to 15 KHz)
-Distortion: <0.05% THD @± 75 KHz dev.
<0.2% THD @± 150 KHz dev. (limiter threshold > 150 KHz)
-Stereo crosstalk: >60 dB (100 to 5 KHz)
>50 dB (20 to 15 KHz) int. MPX encoder
>60 dB with ext. MPX encoder
-Audio channel frequency response: 20 to 15 KHz ± 0.15 dB
-MPX input frequency response: 10 to 100 KHz ± 0.15 dB
-AUX input frequency response: 10 to 100 KHz ± 0.15 dB
-Mains power supply requirements: 90~264VAC; 127~370VDC, Full range universal input
-Operating temperature range: -10 to 45 ℃
-Weight: 12Kg
FMT-150A 150 Watt Digital FM Broadcast Transmitter ON SALE !! $2,495.00
Frequency range: 87.5-108 MHz, 10 KHz/Step
-Modulation: FM, ±75 KHz peak deviation
-Frequency stability: <±100 Hz
-RF output power: 0 to 150W ±0.5 dB (maximum on certain frequency's)
-Max reflected power: 15 W
-Harmonic suppression: <-65 dBC
-RF output impedance: 50 Ω
-RF output connector: N type -female
-Audio/MPX input level: -10 to +13 dBm @±75 KHz deviation
-Audio/MPX input impedance: 10 KΩ / 600 Ω, Balanced / unbalanced
-Audio input connector: XLR-female
-AUX / MPX input level: -10 to +13 dBm @±75 KHz deviation
-AUX channel input impedance: 10 KΩ
-MPX and AUX input connector: BNC-female
-Pre-emphasis: 0 / 50 / 75 us
-S/N ratio Mono: >73 dB (20 to 20 KHz)
-S/N ratio Stereo: >68 dB (20 to 15 KHz)
-Distortion: <0.05% THD @± 75 KHz dev.
<0.2% THD @± 150 KHz dev. (limiter threshold > 150 KHz)
-Stereo crosstalk: >60 dB (100 to 5 KHz)
>50 dB (20 to 15 KHz) int. MPX encoder
>60 dB with ext. MPX encoder
-Audio channel frequency response: 20 to 15 KHz ± 0.15 dB
-MPX input frequency response: 10 to 100 KHz ± 0.15 dB
-AUX input frequency response: 10 to 100 KHz ± 0.15 dB
-Mains power supply requirements: 90~264VAC; 127~370VDC, Full range universal input
-Operating temperature range: -10 to 45 ℃
-Weight: 10 Kg
NEW !! FMT-50A 50 Watt Stereo FM Broadcast Transmitter $1,995.00
- Soft-start from RF mute status.
- Adjustable power output from 0 to 50 W with automatic power control, maintaining the output
- Available with External AUX/MPX input connectors.
- Meets or exceeds all FCC and CCIR requirements.
- High reliability provided by conservatively rated components.
- Modular layout with Plug-in, easy replaceable circuits and parts.
- Built-in stereo coder.
- Full protection for malfunction like reflected power and over temperature.
- Integrated LCD display for all transmit parameter.
-Frequency range: 87.5-108 MHz, 10 KHz/Step-Modulation: FM, ±75 KHz peak deviation
-Frequency stability: <±100 Hz
-RF output power: 0 to 50 W ±0.5 dB
-Max reflected power: 10 W
-Harmonic suppression: <-65 dBC
-RF output impedance: 50 Ω
-RF output connector: N type -female
-Audio/MPX input level: -10 to +13 dBm @±75 KHz deviation
-Audio/MPX input impedance: 10 KΩ / 600 Ω, Balanced / unbalanced
-Audio input connector: XLR-female
-AUX / MPX input level: -10 to +13 dBm @±75 KHz deviation
-AUX channel input impedance: 10 KΩ
-MPX and AUX input connector: BNC-female
-Pre-emphasis: 0 / 50 / 75 us
-S/N ratio Mono: >73 dB (20 to 20 KHz)
-S/N ratio Stereo: >68 dB (20 to 15 KHz)
-Distortion: <0.05% THD @± 75 KHz dev.
<0.2% THD @± 150 KHz dev. (limiter threshold > 150 KHz)
-Stereo crosstalk: >60 dB (100 to 5 KHz)
>50 dB (20 to 15 KHz) int. MPX encoder
>60 dB with ext. MPX encoder
-Audio channel frequency response: 20 to 15 KHz ± 0.15 dB
-MPX input frequency response: 10 to 100 KHz ± 0.15 dB
-AUX input frequency response: 10 to 100 KHz ± 0.15 dB
-Mains power supply requirements: 90~264VAC; 127~370VDC, Full range universal input
-Operating temperature range: -10 to 45 ℃
-Dimensions: 483 x 89 x 400 mm, rack std. 19” 2U
-Weight: 6.5 Kg
FMT - 25A Stereo Digital FM Broadcast Transmitter $1,695.00
- Soft-start from RF mute status.
- Adjustable power output from 0 to 25 W with automatic power control, maintaining the output
- Available with External AUX/MPX input connectors.
- Meets or exceeds all FCC and CCIR requirements.
- High reliability provided by conservatively rated components.
- Modular layout with Plug-in, easy replaceable circuits and parts.
- Built-in stereo coder.
- Full protection for malfunction like reflected power and over temperature.
- Integrated LCD display for all transmit parameter.
-Frequency range: 87.5-108 MHz, 10 KHz/Step-Modulation: FM, ±75 KHz peak deviation
-Frequency stability: <±100 Hz
-RF output power: 0 to 25 W ±0.5 dB
-Max reflected power: 5 W
-Harmonic suppression: <-65 dBC
-RF output impedance: 50 Ω
-RF output connector: N type -female
-Audio/MPX input level: -10 to +13 dBm @±75 KHz deviation
-Audio/MPX input impedance: 10 KΩ / 600 Ω, Balanced / unbalanced
-Audio input connector: XLR-female
-AUX / MPX input level: -10 to +13 dBm @±75 KHz deviation
-AUX channel input impedance: 10 KΩ
-MPX and AUX input connector: BNC-female
-Pre-emphasis: 0 / 50 / 75 us
-S/N ratio Mono: >73 dB (20 to 20 KHz)
-S/N ratio Stereo: >68 dB (20 to 15 KHz)
-Distortion: <0.05% THD @± 75 KHz dev.
<0.2% THD @± 150 KHz dev. (limiter threshold > 150 KHz)
-Stereo crosstalk: >60 dB (100 to 5 KHz)
>50 dB (20 to 15 KHz) int. MPX encoder
>60 dB with ext. MPX encoder
-Audio channel frequency response: 20 to 15 KHz ± 0.15 dB
-MPX input frequency response: 10 to 100 KHz ± 0.15 dB
-AUX input frequency response: 10 to 100 KHz ± 0.15 dB
-Mains power supply requirements: 90~264VAC; 127~370VDC, Full range universal input
-Operating temperature range: -10 to 45 ℃
-Dimensions: 483 x 89 x 400 mm, rack std. 19” 2U
-Weight: 6.5 Kg
